Support
Need help with Windscreen? Email support@windscreen.fly.
We answer email on the ground, not in flight. Windscreen is not certified equipment: if it shows something you do not expect while flying, fly the aircraft, look outside and go by your instruments, and write to us afterwards.
What to include
- Your iPhone or iPad model and iOS version. You'll find both in the iOS Settings app under General › About.
- The app's version, if you know it.
- Your receiver (for example a Stratux, or the panel unit that sends the data) and how it is set up.
- What happened and what you expected. The line of text at the bottom of the screen says what the app is hearing; tell us what it said.
- A screenshot, if you can.
- A recorded flight helps most of all, but it holds where you flew. Send one only if you are content for us to see it.
Receivers and traffic
Which receivers work? Any that sends GDL 90 over Wi-Fi on UDP port 4000. So far Windscreen has been run with a Stratux and with an Avidyne IFD440. Other receivers that send standard GDL 90 should work and have not been tried. Windscreen does not connect to a receiver over Bluetooth.
No traffic shows. Check these in order:
- The phone or tablet is joined to the receiver's Wi-Fi network.
- Windscreen is allowed to use the local network: iOS Settings › Privacy & Security › Local Network.
- The text at the bottom of the screen names your receiver. If it says no receiver is heard, the data is not reaching the app.
- The receiver has a GPS position. Without one the app cannot work out where traffic is from you.
- The traffic range in the menu is wide enough.
- If you are standing still, choose Compass as the heading. Mounted goes by the direction you are moving, and has nothing to go by until you move.
Traffic is drawn in the wrong direction. Open the menu (tap the screen) and look at the heading choice. Mounted is for a phone or tablet fixed in a mount and looking ahead: it takes the way you are travelling as the way it looks. Compass uses the device's own compass, which metal and wiring in a cockpit can pull off. Aircraft uses the heading the aircraft sends, when it sends one. Re-center lines the view up again.
My own aircraft shows as traffic. Open Aircraft in the menu and enter your tail number or Mode S code. The app then leaves that aircraft out.
What is Internet traffic? A way to try the app on the ground when you have no receiver. It asks a public service, adsb.lol, for aircraft near you, and to do that it sends your position rounded to about six nautical miles. It is not for flight: it stops by itself as soon as a receiver is heard, above 75 knots, 500 ft above where it started, or after 15 minutes. The app explains this before you turn it on, and never turns it on by itself. The service allows a set number of requests a day from one internet connection, enough for about 40 minutes; after that no more traffic arrives until the next day by UTC. The traffic data is from adsb.lol and its contributors, under the Open Database License 1.0.
I hear no callouts. Spoken callouts are off until you switch them on in the menu. Callout voice and sound › Sound goes to chooses between ordinary audio (the phone, a cable or Bluetooth audio) and a headset connected as a hands-free telephone. Only nearer traffic is called.
Altitude
The altitude differs from my altimeter. The readout is named for what it is. ALT with BARO and a setting is altitude put right by an altimeter setting, either from the FIS-B weather your receiver hears or one you typed in. GPS ALT is the receiver's GPS altitude. P ALT is pressure altitude, which reads as your altimeter would at 29.92 and can be hundreds of feet from it. To type a setting in, open the menu and press the altimeter button at the top. Your aircraft's altimeter is the one to fly by.
Airports, airspace and flight plans
Where does the airport and airspace data come from? From the FAA's published files, kept in the app, so it works with no internet connection. It covers the United States. It is renewed with app updates, so it can be older than the current 28-day cycle. Class E airspace, military operations areas, temporary flight restrictions and terrain are not in it. Check current charts and NOTAMs.
How do I load a flight plan? In an app that can share a route as a Garmin FPL file (ForeFlight can), share the file and choose Windscreen. Or open the menu, then Destination, then Choose a flight plan file. The app reads the route's points and their order, draws boxes along it, and sets the airport it ends at as the destination. The plan is kept for a day. It is a picture of the route, not guidance: it knows nothing of terrain, obstacles, airspace or your clearance.
Windscreen is not in the other app's share sheet. Scroll to the end of the row of apps and tap More. If it is not there either, save the file to the Files app and use Choose a flight plan file.
Recordings and video
Where are my recorded flights? On your device only. Open the menu, then Flights, to play one back or delete it. They are also in the Files app under On My iPhone › Windscreen, where you can copy or share them yourself.
What is in a recording? The data your receiver sent (your aircraft's position and the traffic around it), the direction the device was pointing, and, if you turn on Record everything, the weather. It holds where you flew.
Does the app record the camera? Not unless you turn on Keep the last minute of video. Then it keeps the most recent minute of what was on screen, and Save the last minute of video writes it to a file on your device. Nothing is recorded with the switch off, and sound is never recorded.
Your data
How do I delete my data? Delete recordings and video in Flights or in the Files app. Deleting the app removes everything it stored. We never receive your recordings, settings or tail number, so there is nothing for us to delete on our side except emails you have sent us. Ask and we will delete them. See the Privacy Policy.
Which devices are supported? iPhone and iPad with iOS 18 or later.